specification RPD-65C model dc voltage rated current current range rated power output voltage adj. range line regulation load regulation setup, rise time hold up time (typ.) voltage range frequency range efficiency (typ.) input inrush current (typ.) leakage current working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing overload ac current (typ.) 12v 5v 4.5a 1.2a 0 ~ 5.8a 0 ~ 1.5a rated load 60w rated output power for convection; 77w with 18cfm min. forced air 120mvp-p 50mvp-p ch1:11.4 ~ 12.8v 2.0% 2.0% 5.0% 5.0% 1.0% 1.0% 800ms, 20ms at full load 20ms at full load 90 ~ 264vac 127 ~370vdc 47 ~ 440hz 1.5a/115vac 0.9a/230vac cold start 25a/115vac 50a/230vac <1ma ch1:13.8 ~ 16.2v 90 ~ 125w output power protection type : hiccup mode, recovers automatically after fault co ndition is removed. protection type : hiccup mode, recovers automatically after fault co ndition is removed. -20 ~ +60 (refer to output load derating curve) 20 ~ 90% rh non-condensing -40 ~ +85 , 10 ~ 95% rh 0.04%/ (0 ~ 50 ) on ch1 output 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 288.1k hrs min. mil-hdbk-217f (25 ) pcb:127*76*28mm (l*w*h) with optional case:130*84.4*37mm (l*w *h) 0.24kg; 63pcs/16kg/1.35cuft file name:rpd-65-spec 2008-03-25 over voltage safety standards harmonic current ems immunity compliance to en55022 (cispr22) class b compliance to en61000-3-2,-3 compliance to en55024, light industry level, criteria a en61000-4-2,3,4,5,6,8,11; env50204, features : r p d - 6 5 s e r i e s environment safety & emc (note 4) protection emi conduction & radiation withstand voltage isolation resistance i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac i/p-o/p, i/p-fg, o/p-fg:100m ohms/500vdc ripple & noise (max.) note.2 voltage tolerance note.3 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 5. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still me ets emc directives. 4. 10% duty cycle maximum within every second. average output power shoul d not exceed the rated power, output voltage above 90% dc voltage. universal ac input/full range 12v or 24v high peak output current capability low leakage current<1ma protections: short circuit / overload / over voltage 60w free air convection, 77w with 18cfm forced air 100% full load burn-in test fixed switching frequency at 65khz 2 years warranty optional l-bracket and cover output power (max.) ul60950-1, tuv en60950-1 approved ch2 ch1 ch2 ch1 7.5a 3.75a peak load note.4 output number 81% 79% 65w dual output switching power supply rpd-65d 24v 5v 2.25a 1.2a 0 ~ 2.9a 0 ~ 1.5a rated load 60w 50mvp-p 150mvp-p ch1:22.8 ~ 26.4v 5.0% 5.0% 2.0% 2.0% 1.0% 1.0% ch1:27.6 ~ 32.4v
file name:rpd-65-spec 2008-03-25 case no. 946a unit:mm dc output connector (cn2) : molex 5273-06 or equivalent pin no. 1,2 3,4 56 assignment v1 gnd v2 nc mating housing molex 5195 or equivalent terminal molex 5194 or equivalent ac input connector (cn1) : molex 5273-03 or equivalent pin no. 12 3 mating housing molex 5195 molex 5194 or equivalent or equivalent terminal mechanical specification 13 cn1 31 2 cn2 54 6 svr1 4- 3.8 2 5.6 115.8 127 5.6 64.8 29mm(max) 76 fs1 18cfm min. fam (60w convection, 77w with fan) 15cm optional cover: no. 946a-t optional l-bracket: no. 946a-d 78 26 62 130 17 68.6 8.2 37 41.7 84.4 2-m3 18 7.1 115.8 6-m3 l=4 4-m3 l=4 assignment ac/l no pin ac/n block diagram fosc : 65khz o.v.p. control com +5v rectifiers & filter switching power filter & rectifiers o.l.p. detection circuit pwm filter & rectifiers +v fg i/p filter emi 3 max. 65w dual output switching power supply r p d - 6 5 s e r i e s
load (%) ambient temperature ( ) (horizontal) -20 -10 0 10 20 30 40 50 60 20 40 60 for pcb with l-bracket+cover option for both pcb only and with l-bracket+cover option 80 100 90 100 110 135 155 264 230 100 90 80 70 60 50 40 input voltage (v) 60hz load(%) output derating vs input voltage pcb only derating curve 65w dual output switching power supply r p d - 6 5 s e r i e s file name:rpd-65-spec 2008-03-25
|
